The Funk Motorsport T25 Turbo Blanket is made from the highest quality materials and are available for all turbo applications.
Due to the close proximity between the two halves of the turbo, it is extremely common for heat sink to occur. This can decrease performance output while increasing the work of the input components during the combustion cycle. Funk Motorsport T25 Turbo jackets are designed to keep the hot side of your turbo insulated while keeping the cold side at optimum temperatures. This helps to provide cooler airflow to the cooling system and MAF sensor, leading to an increased ignition spark and higher output of energy from combustion. By ensuring that the turbine sector of the turbo remains hot, less heat will be dissipated into the engine bay, ensuring that exhaust gases will flow with less turbulence from the exhaust. See this turbo Blanket in action in our video section!
Please note: Returns are not accepted on clearance Heat Management Products
Why is heat management so important? Find out here.
This T25 turbo blanket fits (but is not limited to) fitting the following turbos:
TD04-15T, GT2860, BorgWarner EFR 7163
Note of caution:
This turbo blanket is not flammable. However if any flammable fluids are introduced into close proximity of the blanket, the blanket could become a suitable ignition source for a flame to be produced. Please ensure that all necessary precautions are taken in regards to the appropriate maintenance of all oil and fuel lines and fittings surrounding the turbo charging and fuel injection system. Funk Motorsport take no responsibility for fluid contamination our products.
Whilst this heat shield is removable after fitment, it is not designed to be removed once a number of heat cycles has been introduced into the product. After the blankets have been heated they will lose some of their internal construction properties, though we must stress that this does not reduce any thermal properties of the product.
Max Temperature Rating: 1260 Deg C
Continuous Use Limit: 1000 Deg C
Exterior Surface (Titanium)
Direct Contact Limit: 982 Deg C
Radiant Heat Limit: 1371 Deg C
Exterior Surface (Carbon Fibre)
Direct Contact Limit: 1032 Deg C
Radiant Heat Limit: 1421 Deg C